Mitsubishi Electronics WS-55859 オーナーマニュアル

These inputs can be used for the connection of a VCR, Super VHS (S-VHS) VCR, DVD 

player, standard satellite receiver, or other A/V device to the TV.  Please note that if you 
connect to the S-VIDEO terminal, the VIDEO terminal is deactivated.  The VIDEO terminal is 
active when there is no S-Video connection.

The Monitor Output sends the TV audio and video signals from Ant-A, Ant-B and Inputs 

1-5 to a VCR or other analog A/V equipment.  It will also send digital audio and video 

signals from Ant-DTV and IEEE-1394 products that are not copy protected, and convert 

them to analog signals.  From VGA, Component 1 and 2 and Input-DTV, no signals will be 

sent.  The PIP output sends the PIP’s or POP’s audio signal to an ampli er  or wi rel ess 

headphones.  If no PIP or POP is displayed, the PIP output will not send any audio.

ANT-A and ANT-B receive analog NTSC signals from VHF/UHF antennas or an analog 

NTSC cable system.  LOOP OUT sends the ANT-A signal out to another component, such 
as a cable box or VCR.

Connecting IR emitters here allows the TV to pass IR commands from most IR remote 

controls to other A/V devices that are out of range of the remote control.

This input can be used for the connection of a computer.  Please see Appendix B, page 
73, for signal compatibility.

These inputs can be used for the connection of A/V equipment with component video 

outputs, such as a DVD player.  Please see Appendix B, page 73, for signal compatibility.

This input is used to connect a DTV receiver, and can be con gur ed f or  HDTV s i gnal  types 

component (YPrPb), RGB sync on green, and RGB plus H&V.  Please see Appendix B, 
page 73, for signal compatibility.