Mitsubishi Electronics WD-52725 ユーザーズマニュアル

52

53

Devices (1394 or IR Controlled)   

For NetCommand compatible satellite receivers and 
some cable boxes, GUIDE will display the on-screen 
programming guide for the receiver or cable box. 
Press ADJUST  ,  ,   or   and ENTER to navigate 
the displayed Guide.  For NetCommand compatible 
satellite receivers, you may also be able to use the 
number or other additional buttons.

For NetCommand compatible DVD players, GUIDE will 

display the DVD disc “top” menu (not the setup menu).

For A/V Discs, pressing GUIDE will display the Track 

List screen

For IEEE 1394 devices with digital connections, press 

GUIDE twice to display the device’s Guide

ChannelView   

 

 

 

Press GUIDE while viewing Ant-1 or Ant-2 to display 
a list of available memorized digital channels (D) and 
analog (A) channel information (if available from the 
broadcaster).  This list is called ChannelView™.  

ChannelView for digital channels will show the major 
and sub-channels (or bitstreams).  Analog channel 
information will display as sent.  Press ADJUST   or 

  to page through the all the channels in memory, one 

by one.  To page through the choices quickly, press CH  

 or  .

The information on this screen is sent by the 
broadcaster.  If limited data is shown or no program 
data appears, it is because the broadcaster is not 
sending the information.  This is not a defect of your 
TV.  See Troubleshooting for information regarding 
failed recordings.

   

Using the GUIDE Button to Display ChannelView™ and Menus

To record a current program, press REC (record) when 

your program choice is highlighted on the program 

list in ChannelView.  A red “R” will be added before 

the program time and name.  The TV will immediately 

switch to the selected channel and start recording.  

To record a future program, press ADJUST    or   
to select the channel you want to record from.  Press 

INFO to see the upcoming programs for that channel.  
Press ADJUST    or    to move to your program 
choice.  Press REC (record) when your choice is 

highlighted  in ChannelView.  A red ”R“ will be added 

after the input name.  The message, “The recording has 

been added to the Record List” will display.  To view, 

change or cancel the recording, use the Record List  

(page 55).  The program you selected will be on that 

list.  

For complete ChannelView information to be 
refreshed daily, the TV must be powered Off 
between 5 to 15 minutes a day, depending on the 
number of channels in memory.  If the TV loses 
power, the program listings will be temporarily  
lost. 

The GUIDE Button

Depending on the device you are currently viewing,  pressing GUIDE allows you to see different program guides or 
menus.

Device Selection Menu

For compatible traditional VCRs, pressing GUIDE when 

the VCR is highlighted on the Device Selection menu 

will change the VCR’s input.

When the A/V Receiver icon is highlighted in the Audio 

Section, pressing GUIDE switches the A/V Receiver 

from analog audio to digital audio and vice versa.

Record To List

When in the Record To menu, pressing GUIDE will 

display the current list of programmed recordings.  

Please see Record List,  page 55 for more infomation.