Viewsonic PJ751 ユーザーズマニュアル

ViewSonic  PJ751

1  Press the MAGNIFY (ON) button
The projector enters MAGNIFY mode.

2  Press the POSITION button, then use the 

, 

, 

, 

 

buttons to select the area to enlarge and then 

press the POSITION button again to confirm your selec-

tion.

3  Press the 

, 

buttons to zoom in and out of the selected area.

Press the MAGNIFY (OFF) button to exit MAGNIFY mode and restore 

the screen to normal. (The projector will also automatically exit MAG-

NIFY mode if there is a change in the input signal's state.)

NOTE:

The projector will automatically exit from MAGNIFY mode if either the INPUT SELECT, AUTO, 

ASPECT or VIDEO feature is used, or if there is a change in the input signal's state.

1  Press the FREEZE button

The 

 icon appears and the screen will freeze at the current image. Press 

the FREEZE button again and the 

 appears as the projector exits 

FREEZE MODE.

NOTE:
• The projector will automatically exit  FREEZE mode if either the POSITION, VOLUME, 

MUTE, AUTO, BLANK ON/OFF, or MENU ON/OFF feature is used, or if there is a change in 

the input signal's state.

• If the projector continues projecting the same image for a long time (i.e. you forget to exit 

FREEZE mode), the image may remain as an afterimage. Do not leave the projector in FREEZE 

mode for too long.