Viewsonic PJ751 ユーザーズマニュアル

ViewSonic  PJ751

Using the SCREEN menu, the five items shown in the Table below 

can be performed. Please perform each operation according to the 

instructions in the Table.

MyScreen

 

ORIGINAL

The BLANK Screen may be voluntarily selected. The BLANK Screen is displayed when 

the screen has been erased (i.e., made to vanish) by manipulating the BLANK button 

(please refer to the “Temporarily Blanking the Screen” section of the separate booklet, 

Vol. 1 (Basic)).
MyScreen: Using the MyScreen category (see this Table, below), one can register a 

desired screen (or screens). At the time of factory shipment, this is set as a non-pat-

terned (plain) blue color screen.
ORIGINAL: Existing standard screens. Please make confirmation using the actual 

screen(s).
Option screens: Various colored non-patterned (plain) screens displayed within the 

Menus.
The MyScreen and the ORIGINAL Screen will each change to a non-patterned (plain) 

black color screen several minutes after being displayed.

MyScreen  

ORIGINAL  

TURN 

OFF

The START UP Screen may be voluntarily selected. The START UP Screen is displayed 

when no signal has been inputted, or when spec signals are being inputted.
MyScreen: Using the MyScreen category (see this Table, below), one can register a 

desired screen (or screens). At the time of factory shipment, this is set as a non-pat-

terned (plain) blue color screen.
ORIGINAL: Existing standard screens. Please make confirmation using the actual 

screen(s).
TURN OFF: A non-patterned (plain) blue color screen.
The MyScreen and the ORIGINAL Screen will each change to the BLANK Screen sev-

eral minutes after being displayed.

Example: SCREEN Menu

(BLANK)