Panasonic PT-AE8000U ユーザーズマニュアル

ENGLISH

 - 71

In the 3D video the depth of field effects in front of and 

into the screen are adjusted while confirming on the 

monitor display.

 

z

The parallax adjustment monitor is displayed. 

The display content of each mode is described 

below.

 

z

Press the <DEFAULT> button to return to  

pre-adjustment settings.

 

z

Press the <FUNCTION> button to freeze and 

unfreeze.

The display content of each mode in the parallax 

adjustment monitor is as follows.

Displays the parallax of the 

entire image at the bottom of the 

projection screen.

Displays the maximum parallax 

of the entire image in one 

dimension.

Displays the parallax of the 

entire image by superimposing 

on the image. (The image is in 

monochrome signals, and only 

the parallax is colored.)

 

z

If the red line of the in front of screen parallax descends 

below the area demarcated by the reference line (white 

dashed line) and the lower maximum line (white solid 

line), or if the blue line of the into screen parallax ascends 

above the area demarcated by the reference line (white 

dashed line) and the upper maximum line (white solid 

line), then make sure to watch from a large enough 

distance from the screen or stop watching. 

For explanation about each line, refer to the following 

explanation for [Mode 1].

The lines on the parallax adjustment monitor in 

[Mode1] display the following content:

Default display for video without 

parallax

Displays the into screen parallax

Displays the in front of screen 

parallax

Displays an estimate for parallax of 

general 3D video

Into screen 

parallax

In front of 

screen parallax

ADJUST

ENTER : APPLY

DEFAULT : RESET

FUNCTION : FREEZE

 

This indicates the maximum estimate  

in front of screen parallax while measuring.

This indicates the maximum estimate  

into screen parallax while measuring.

Reference 

line

*  The illustration shown here depicts how an image is 

projected.