Panasonic PT-LB51SU ユーザーズマニュアル

You can check how long the lamp has been used.

You can set the off timer to switch off the POWER of the 
projector after a certain period of time automatically 
when no signal is detected. Press I H to select the 
required period from 15 to 60 minutes at intervals of 
5 minutes.

You can switch the projector start up status for when the 
Power cord

 is connected. Press I H to select the 

required option.

  OFF

The projector will start from the 
standby mode or the projecting 
mode.
 (The projector will start from the 
same status as when the power cord 
was disconnected.)

  ON

The projector will start from the 
projecting mode.

You can turn off the function of the control panel buttons 
on the projector body. Press I H to select the required 
option.

  INVALID

Invalidate the control panel buttons
Confirmation screen will be 
displayed.

  VALID

Validate the control panel buttons

You can turn off the AUTO SETUP function for when the 
COMPUTER

 signal is detected.

  AUTO

When the projector detect a 
COMPUTER

 signal, adjust the 

projected image position 
automatically for SIGNAL SEARCH, 
DOT CLOCK

 and CLOCK PHASE.

  BUTTON

Only when the AUTO SETUP button 
is pressed, the projected image 
position will be adjusted for DOT 
CLOCK

 and CLOCK PHASE. See 

You can turn off the auto signal detecting system.

  ON

Detect the input signal from the 
terminals and project the image.

  OFF

Deactive

When installing the projector, select the projection 
method according to the projector position. Press I H 
to cycle through the options. See “Projection method” on 
page 16.

• LAMP RUNTIME is a relevant matter for lamp 

replacement timing. See “Replacing the Lamp unit” on 
page 41.

• When the projector is started from the projecting mode, 

pressing the POWER button procedure is skippable.

• Usually the recommended setting is AUTO.

• SIGNAL SEARCH is not available when any input 

signal is projecting.

• Usually the recommended setting is ON.

Setting on a desk/floor and 
projecting from front

Mounting in the ceiling and 
projecting from front

Setting on a desk/floor and 
projecting from rear

Mounting in the ceiling and 
projecting from rear