Jet Tools JMD-15 ユーザーズマニュアル
9
Controls
Longitudinal Hand Wheels: (X-axis) (A, Fig. 6)
Located on either side of the table. Moves table
side to side.
side to side.
Cross Feed Hand Wheel: (Y-axis) (B, Fig. 6)
Located on the front of the base. Moves table
toward, or away from the column.
toward, or away from the column.
Adjustable Table Stops: (C, Fig. 6)
Located on table front. Adjust to stop table at
any setting along the longitudinal axis.
any setting along the longitudinal axis.
Table Locks: (D & E, Fig. 6)
Longitudinal table locks are located on front of
the table. Cross-feed table locks are located on
the right side under the table. Turn clockwise to
lock.
the table. Cross-feed table locks are located on
the right side under the table. Turn clockwise to
lock.
Depth Stop:
JMD-15: (K, Fig. 8) located on the left side. Set
nuts for desired depth stop.
JMD-18: (F, Fig. 7) located in the front. Push in
the button on the front of the quick adjust stop
and move to desired position.
JMD-18PFN: Set the depth stop on the power
down feed assembly to desired depth for
repetitive drilling to the same depth, see “Power
Feed Operation” on page 12.
nuts for desired depth stop.
JMD-18: (F, Fig. 7) located in the front. Push in
the button on the front of the quick adjust stop
and move to desired position.
JMD-18PFN: Set the depth stop on the power
down feed assembly to desired depth for
repetitive drilling to the same depth, see “Power
Feed Operation” on page 12.
Downfeed Handles: (G, Fig. 7)
Located on the right side of the head casting.
Counter-clockwise movement advances the quill
toward the table.
Counter-clockwise movement advances the quill
toward the table.
Return spring retracts the
handles.
Note:
the knob (I, Fig. 7) must be
loose for the downfeed handles to work.
Fine Feed Hand Wheel: (H, Fig. 7)
Located on the front of the head casting.
To
activate, tighten the knob (I Fig. 7) and turn the
power feed speed range dial (J, Fig. 7) to zero.
power feed speed range dial (J, Fig. 7) to zero.