Panasonic DW10000U ユーザーズマニュアル
ENGLISH –
75
Special Features
Setting a projector ID
The projector has an ID number setting function that
helps the user to control two or more projectors either
simultaneously or separately with a single remote
control. The ID number is set to “ALL” by default.
Hence the ID number need not be set when only
one projector is used.
helps the user to control two or more projectors either
simultaneously or separately with a single remote
control. The ID number is set to “ALL” by default.
Hence the ID number need not be set when only
one projector is used.
1. Press
▲▼ to select
“PROJECTOR ID”.
2. Press
◄► to switch
“PROJECTOR ID”.
The setting will change as follows each time
◄► is pressed.
◄► is pressed.
ALL
1
64
2
3. Press MENU twice.
This concludes the setting procedure and the
on-screen indications disappear and the normal
screen appears again.
on-screen indications disappear and the normal
screen appears again.
Note
The ID number can be set to “ALL”, or selected from
“1” to “64”.
“1” to “64”.
If the projectors are given ID numbers, their remote
controls must be assigned the same ID numbers,
respectively.
controls must be assigned the same ID numbers,
respectively.
If the ID number of a projector is set to “ALL”, it can
be controlled by the remote control or the PC with
any ID number.
If multiple projectors are used and some of
them have their IDs set to “ALL”, they cannot be
controlled separately from the projectors with other
ID numbers. For details on remote control ID setting,
see page 18.
be controlled by the remote control or the PC with
any ID number.
If multiple projectors are used and some of
them have their IDs set to “ALL”, they cannot be
controlled separately from the projectors with other
ID numbers. For details on remote control ID setting,
see page 18.
•
•
•
•
•
OPTION2
PROJECTOR ID
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
PASSWORD
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
PASSWORD
MENU SELECT
CHANGE
2
FRONT-F
LOW
H
QUAD
OFF
LOGO1
OPTION2
PROJECTOR ID
PROJECTOR ID
INSTALLATION
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
PASSWORD
ALTITUDE
DIRECTION
LAMP SELECT
LAMP RELAY
RS-232C
SYSTEM INFORMATION
AIR FILTER CLEANING
DATE AND TIME
STARTUP LOGO
PASSWORD
MENU SELECT
CHANGE
2
FRONT-F
LOW
H
QUAD
OFF
LOGO1
Option2 settings
This menu can be used to make a variety of
picture and projector settings.
picture and projector settings.
MENU
Press to display the
MAIN MENU screen.
MAIN MENU screen.
Press to select
“OPTION2”.
“OPTION2”.
Press to display the
“OPTION2” menu.
“OPTION2” menu.
MENU
Press to display the
MAIN MENU screen.
MAIN MENU screen.
Press to select
“OPTION2”.
“OPTION2”.
Press to display the
“OPTION2” menu.
“OPTION2” menu.
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
OPTION1
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
OPTION1
OPTION2
TEST PATTERN
SIGNAL LIST
NETWORK
SECURITY
SECURITY
MENU SELECT
SUB MENU
SUB MENU
ENTER
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
OPTION1
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
OPTION1
OPTION2
TEST PATTERN
SIGNAL LIST
NETWORK
SECURITY
SECURITY
MENU SELECT
SUB MENU
SUB MENU
ENTER
▲▼◄►
ENTER
ENTER
DEFAULT
MENU