Sharp PGLW2000 ユーザーズマニュアル
30
Operating with the Remote Control
POINTER button
ECO+QUIET button
Adjustment buttons
(P/R/O/Q)
(P/R/O/Q)
BREAK TIMER button
SPOT button
AUTO SYNC button
FREEZE button
PICTURE MODE button
MAGNIFY buttons
EFFECT button
Displaying and Setting the
Break Timer
Break Timer
1
Press
BREAK TIMER.
The timer starts to count down from 5
minutes.
minutes.
On-screen display
2
Press
P/R/O/Q to adjust the
length of the break time.
Increases with P or Q
5 minutes
➞ 6 minutes ➞ 60 minutes
Shortens with O or R
4 minutes
➞ 3 minutes ➞1 minute
The break time can be set in units of one
minute (up to 60 minutes).
minute (up to 60 minutes).
Canceling the break timer display function
Press BREAK TIMER.
The Break Timer is not available while the
projector is operating the following functions.
- Auto Sync
- Freeze
- AV Mute
- Input Search
projector is operating the following functions.
- Auto Sync
- Freeze
- AV Mute
- Input Search
•
Note
•
•
•
•
1
2
Displaying the Pointer
1
Press
POINTER and press P/R/
O/Q on the remote control to
move the pointer.
move the pointer.
Press EFFECT to change the pointer icon
(5 types).
(5 types).
Star
Finger1
Finger2
Heart
Underline
2
Press
POINTER again.
The pointer will disappear.
Using the Spot Function
1
Press
SPOT and press P/R/O/Q
on the remote control to move
the spot area.
the spot area.
Press EFFECT to change the spot area
size (3 types).
size (3 types).
1/9
1/25
1/8
2
Press
SPOT again.
The spot area will disappear.
Switching the Eco+Quiet
Mode
Mode
Press ECO+QUIET to switch the
Eco+Quiet mode between on and off.
Eco+Quiet mode between on and off.
When the Eco+Quiet Mode is set to “ON”, the
sound of the cooling fan will turn down, the power
consumption will decrease, and the lamp life will
extend.
sound of the cooling fan will turn down, the power
consumption will decrease, and the lamp life will
extend.
Refer to “Eco+Quiet” on page
for details.
•
Note
•
•
•
•
•
1
2
1
2