Zenith R40W46 ユーザーズマニュアル

33

The remote control for your projection TV is a multi-brand or
universal remote control. It can be programmed to operate most
remote-controllable devices of other manufacturers.

Note that the remote control may not control all models of other
brands.

1. Test your remote control.

To find out whether your remote control can operate the IR device
without programming, turn on the IR device such as a VCR and
press the corresponding mode button (VCR) on the remote
control, while pointing at the IR device. Test the POWER and CH
+/- buttons to see if IR device responds properly. If not, the remote
requires programming to operate the device.

2. Turn on the IR device to be programmed, then press the

corresponding mode button on the remote control.

3. Press the POWER and MUTE buttons simultaneously, the remote

control is ready to be programmed for the code.

4. There are two ways to find the right code for the IR device.

A. If you press the CH +/- buttons repeatedly, the codes will
change one at-a-time. Press the POWER button after each code
change. If the right code is found, the device will turn off.

B. Enter a code number using the number buttons on the remote.

Programming code numbers for the corresponding component
can be found on the following pages. Again, if the code is correct,
the device will turn off.

5. Press the EXIT button to store the code.

6. Test the remote control functions to see if the IR device responds

properly. If not, repeat from step 2.

1

2

3

4

5

6

7

8

9

0

tv

vcr cable dvd sat

mode

light

power   

tv/video

sleep

comp/dvi

flashbk

cc

arc

video

audio

fcr

mute

vol

ch

swap

pipch- pipch+

pip

still pip input position

mts

menu

exit

record

stop

pause

rew

play

ff

skip

right

enter

left

down

up