EIKI LC-X1UL ユーザーズマニュアル

 

 

 

CONNECTING THE PROJECTOR 

CONNECTING THE COMPUTER 

CONNECT NC 

TO THE COMPU ER.  PUT 1 

JACKS (BNC TYPE x 5

)

Personal computers can be connected to the computer input (Red, Green, Blue, Horiz. Sync. and Vert. Sync.) on the 

projector. 

•  Connect the computer to these jacks using the BNC cables (not provided). 

 

CONNECTING TO THE COMPUTER INPUT 2 TERMINAL {HDB1 5-PIN (VGA)} 

Personal computers can be connected to the HDB1 5-pin (VGA) terminal on the projector. 
•  Connect the computer to these terminals using the VGA cable or VGA 

cable with VGA/MAC adapter (provided). 

 

WARNING:  For projectors, the VGA cable provided is designed to reduce RFI (Radio Frequency Interference) 

emissions. For regulatory compliance reasons, this cable must be used and must not be replaced by any 

other cable. 

 

CONNECTING TO THE COMPUTER AUDIO INPUT JACKS (1 and 2)

 

•  Connect audio outputs from your computer to these jacks using the RCA cable (not provided). 
•  If the audio input of the audio equipment is stereo, be sure to connect the 

right 

and 

left 

channels to the respective right 

and left 

jacks. 

• If the audio input of the audio equipment is monaural, connect it 

to the left jack. 

CONNECTING TO THE MULTI-POLE 12-PIN (CONTROL PORT) CONNECTORS (1

and 2

) 

• 

When the computer is operated by the remote control unit, connect three different type of cables (provided) between control 

port and computer mouse port or serial port.

IBM Compatible computer 

with PS/2 

mouse 

port

 

Mouse Cable for PS/2 port.

 

IBM Compatible computer

with 

serial control port.

 

Mouse 

Cable 

for 

Serial 

port.

 

Apple Macintosh computer with ADB mouse port 

Mouse Cable for ADB port. 

 

 

 

This terminal contains the information that is viewed on the screen. 

An external monitor can be connected to the HDB1 5-pin (VGA) terminal on the projector. 

• Connect the monitor 

to this terminal using the VGA cable (not provided).