ASUS 632 ユーザーズマニュアル
Get started!
1-5
RESET
Reset switch
Headphone jack
Sync and power cable
connector
connector
Top features
•
External antenna cover - covers the external antenna port. If the GPS
signal is weak, connect an external antenna to the port.
signal is weak, connect an external antenna to the port.
•
SD card slot - accommodates an SD memory card, MMC memory card
or an SDIO interface card (e.g. 802.11b, camera, barcode scanner, etc.)
or an SDIO interface card (e.g. 802.11b, camera, barcode scanner, etc.)
•
Power/Backlight button - turns the device power on or off if you press
the button quickly. Press and hold the button for a few seconds to turn
the backlight on or off. Turning off the backlight saves battery power.
the button quickly. Press and hold the button for a few seconds to turn
the backlight on or off. Turning off the backlight saves battery power.
Bottom features
SD
SD card slot
(SD/SDIO/MMC)
(SD/SDIO/MMC)
Power button
External antenna cover
Stylus
•
Headphone port - connects a headphone.
•
Sync and power cable connector - connects to the 26-pin female
connector on the cradle. If you are not using the cradle, connect the 26-
pin USB sync cable directly to this connector to synchronize your device
with your computer.
connector on the cradle. If you are not using the cradle, connect the 26-
pin USB sync cable directly to this connector to synchronize your device
with your computer.
•
Reset switch - allows you to perform a
soft reset
in case the device
malfunctions, or when an application hangs. Press the tip of the stylus on
this switch to reset the system.
this switch to reset the system.
NOTE
To perform a
hard reset
, press and hold the power button
while you press the tip of the stylus on the reset switch. A
hard reset restores the original configuration of your device
and erases all data. Back up your data before performing
a hard reset!
hard reset restores the original configuration of your device
and erases all data. Back up your data before performing
a hard reset!