Franklin STK-2032 ユーザーズマニュアル



AC adaptor jack: Your BOOKMAN
may be equipped with a standard 3.5 mm
jack for use with a 9-volt, 200-300 milliamp
AC/DC adaptor.

This symbol indicates that the inner core
of the plug of an AC adaptor is negative
and that the outer part of the plug is posi-
tive. If your AC/DC adaptor does not
have this symbol, confirm its compatibil-
ity at its place of purchase.

Headphone jack: Your BOOKMAN
may also have a 3.5 mm stereo head-
phone jack for use with a standard im-
pedance 8 Ohm headset.

Headphone

 jack

If the BOOKMAN keyboard fails to re-
spond, or if its screen performs errati-
cally, first press 

 and then press

 twice. If nothing happens, follow

the steps below to reset it.
Warning: Pressing the reset button
with more than very light pressure may
permanently disable your BOOKMAN. In
addition, resetting BOOKMAN erases
settings and information entered into its
built-in book, and in an installed cartridge.

If nothing happens, try Step 2.

2. Use a paper clip to gently press

BOOKMAN’s reset button.
• If your BOOKMAN has one car-

tridge slot, look for the recessed pin-
sized hole on the battery cover or
near the cartridge slot.

• If your BOOKMAN has two

cartridge slots, the reset button is
located on the front of the unit next
to 

 .

AC adaptor

 jack