Polycom DOC2702A ユーザーズマニュアル
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000
5-34
Polycom, Inc.
Method II
Depending on the dialing direction, the following procedures must be performed:
Depending on the dialing direction, the following procedures must be performed:
Setting Flags on the RMX
When running conferences in mixed environment (RMX and MGC) there may be small
When running conferences in mixed environment (RMX and MGC) there may be small
differences between the line rates each MCU is sending. In the RMX, several flags must be
set to ensure that these differences will not cause the cascaded link to connect as Secondary
and that Content flows correctly between the cascaded conferences. This procedure is
performed once per RMX.
To modify the flags:
1
To modify the flags:
1
In the RMX Web Client menu, click Setup>System Configuration.
2
In the System Flags dialog box, add the following new flags and values:
—
—
MIX_LINK_ENVIRONMENT=YES
Setting this flag to YES will adjust the line rate of HD Video Switching conferences
run on the RMX 1500/2000/4000 from 1920Kbps to 17897Kbps to match the actual
rate of the HD Video Switching conference running on the MGC. In such case, the
conference can include IP and ISDN participants.
—
IP_ ENVIRONMENT_LINK=NO
Setting this flag to YES will adjust the line rate of HD Video Switching conferences
run on the RMX 1500/2000/4000 from 1920Kbps to 18432Kbps to match the actual
Table 5-4
Set up Procedures according to the Dialing Direction
Dialing
Direction
Direction
MGC Level 1
RMX 1500/2000/4000
Level 2
MGC to RMX
Set the appropriate flags (done once
only).
only).
Set the appropriate flags (done once
only).
only).
Define the cascade-enabled Entry
Queue, setting it as Slave.
Queue, setting it as Slave.
Define the conference setting and
its line rate to be the same as the
one set on the RMX.
its line rate to be the same as the
one set on the RMX.
Define the conference setting and its line
rate to be the same as the one set on the
MGC.
rate to be the same as the one set on the
MGC.
Define the dial-out participant
(Cascaded Link) to the conference
running on the RMX.
(Cascaded Link) to the conference
running on the RMX.
RMX to MGC
Set the appropriate flags (done once
only)
only)
Set the appropriate flags (done once
only)
only)
Define the cascade-enabled Entry
Queue.
Queue.
Define the conference setting and
its line rate to be the same as the
one set on the RMX.
its line rate to be the same as the
one set on the RMX.
Define the conference setting and its line
rate to be the same as the one set on the
MGC.
rate to be the same as the one set on the
MGC.
Define the dial-out participant (Cascaded
Link) to the conference running on the
MGC, setting the participant Cascade
parameter to Slave.
Link) to the conference running on the
MGC, setting the participant Cascade
parameter to Slave.