Polycom DOC2702A ユーザーズマニュアル
Chapter 23-RMX Hardware Monitoring
Polycom, Inc.
23-13
2
Click the Event Log tab to view a log of events that was recorded by the system on the
HW component.
For more information, see "MCU Properties - Event Log” on page
For more information, see "MCU Properties - Event Log” on page
.
3
Click the Active Alarms tab to view alarms related to the hardware component, i.e.
temperatures and main power sensors.
For more information, see “Active Alarms” on page
For more information, see “Active Alarms” on page
.
4
Click Close to return to the HW Monitor pane.
To View the Supporting Hardware Components Properties:
1
1
In the Hardware Monitor pane, either double-click or right-click and select properties for
the desired supporting hardware component.
The component’s properties dialog box will appear with the General Info tab displayed.
The component’s properties dialog box will appear with the General Info tab displayed.
Backplane Properties:
The RMX unit’s backplane properties provides the following information:
The RMX unit’s backplane properties provides the following information:
Serial Number
The hardware component’s serial number.
Card Type
Displays the type of card that occupies the slot.
Card Part Number
The part number of the HW component’s board.
Card MAC Address 1
Specific hardware address of the component. This address is burnt
onto the component and is automatically identified by the system.
onto the component and is automatically identified by the system.
Card MAC Address 2
(If applicable) second Mac address.
Table 23-10
Card Properties - General Info (Continued)
Field
Description
Table 23-11
Backplane Properties- General Info
Field
Description
HW Version
The Backplane’s current hardware version.
SW Version
The Backplane’s current software version.
Serial Number
The Backplane’s serial number.
Card Type
The name of the hardware component for which information is being
displayed, e.g. Backplane.
displayed, e.g. Backplane.