Patton electronic 1195 ユーザーズマニュアル
Model 1195 Overview
14
Model 1195 Getting Started Guide
1 • General information
Model 1195 FiberLink E1/Ethernet Mux is a point to point high performance optical line transmission
equipment, combines 8, ITU-T G.703 compliant standard electrical E1s plus 100BaseT Ethernet signal into
an optical data stream for transport over fiber optic pairs. Several transmitter options for different cable types
and wave-lengths are available. 1+1 optical path redundancy is offered and available as an option.
equipment, combines 8, ITU-T G.703 compliant standard electrical E1s plus 100BaseT Ethernet signal into
an optical data stream for transport over fiber optic pairs. Several transmitter options for different cable types
and wave-lengths are available. 1+1 optical path redundancy is offered and available as an option.
Features and Benefits
•
Integrated E1 Plus Ethernet Optical Multiplexer
•
Compact design that performs E1 and Ethernet channel multiplexing & de-multiplexing to an optical out-
put
put
•
Provides visible and audible alarm indication
•
Provide Remote power detection (RPD)
•
Low power consumption
•
Orderwire (EOW) channel for end to end installation and maintenance
•
Local and remote loop back test for diagnostics
•
1+1 Fiber Path protection
•
ALS (Auto Laser Shutdown) facility for eye safety
•
10/100M Ethernet Port - 100 Mbps Ethernet data transmission rate complies with IEEE 802.3
•
Supports auto negotiation and flow control (pause)
•
Clock options: internal/loop-timed
•
Provides visible and audible alarm indications
•
Local and remote loopback controls for diagnostics and troubleshooting
•
Local configuration management through RS232 Serial Port
•
Remote configuration and management through 10/100BaseT Ethernet
•
Port - Telnet (english text commands)
•
SNMP (V1 and V2C)
For Testing: Always Install Optical Attenuators. For distances of less than 10
km, optical attentuators must be intalled on the Optical Links. Otherwise, the
optics will be permanently damaged.
km, optical attentuators must be intalled on the Optical Links. Otherwise, the
optics will be permanently damaged.
WARNING
Figure 1. Model 1195/4E1
Model 1195/4E1