Galil DMC-13X8 ユーザーズマニュアル
USER MANUAL
Chapter 7 Application Programming
• 125
#CMDERR
Begin command error subroutine
IF _TC=6
If error is out of range (KP -1)
N=1
Set N to a valid number
XQ _ED2,_ED1,1
Retry KP N command
ENDIF
IF _TC=1
If error is invalid command (TY)
XQ _ED3,_ED1,1
Skip invalid command
ENDIF
EN
End of command error routine
Mathematical and Functional Expressions
Mathematical Operators
For manipulation of data, the DMC-13X8 provides the use of the following mathematical operators:
OPERATOR FUNCTION
+ Addition
- Subtraction
* Multiplication
/ Division
&
Logical And (Bit-wise)
|
Logical Or (On some computers, a solid vertical line appears as a broken line)
() Parenthesis
The numeric range for addition, subtraction and multiplication operations is +/-2,147,483,647.9999.
The precision for division is 1/65,000.
The precision for division is 1/65,000.
Mathematical operations are executed from left to right. Calculations within a parentheses have
precedence.
precedence.
Examples:
SPEED=7.5*V1/2
The variable, SPEED, is equal to 7.5 multiplied by V1 and divided by 2
COUNT=COUNT+2
The variable, COUNT, is equal to the current value plus 2.
RESULT=_TPX-(@COS[45]*40)
Puts the position of X - 28.28 in RESULT. 40 * cosine of 45
° is 28.28
TEMP=@IN[1]&@IN[2]
TEMP is equal to 1 only if Input 1 and Input 2 are high
Bit-Wise Operators
The mathematical operators & and | are bit-wise operators. The operator, &, is a Logical And. The
operator, |, is a Logical Or. These operators allow for bit-wise operations on any valid DMC-13X8
numeric operand, including variables, array elements, numeric values, functions, keywords, and
arithmetic expressions. The bit-wise operators may also be used with strings. This is useful for
separating characters from an input string. When using the input command for string input, the input
variable will hold up to 6 characters. These characters are combined into a single value which is
represented as 32 bits of integer and 16 bits of fraction. Each ASCII character is represented as one
byte (8 bits), therefore the input variable can hold up to six characters. The first character of the string
will be placed in the top byte of the variable and the last character will be placed in the lowest
operator, |, is a Logical Or. These operators allow for bit-wise operations on any valid DMC-13X8
numeric operand, including variables, array elements, numeric values, functions, keywords, and
arithmetic expressions. The bit-wise operators may also be used with strings. This is useful for
separating characters from an input string. When using the input command for string input, the input
variable will hold up to 6 characters. These characters are combined into a single value which is
represented as 32 bits of integer and 16 bits of fraction. Each ASCII character is represented as one
byte (8 bits), therefore the input variable can hold up to six characters. The first character of the string
will be placed in the top byte of the variable and the last character will be placed in the lowest