Mitsubishi Electronics IB-1500193(ENG)-D ユーザーズマニュアル

7 - 8

1. Correctly transport the product according to its weight. Failure to do so could result in injury.

2. Do not stack the product above the indicated limit.

3. Installation directly on or near combustible materials could result in fires.

4. Install the unit as indicated at a place which can withstand the weight.

5. Do not get on or place heavy objects on the unit. Failure to observe this could result in injury.

6. Always use the unit within the designated environment condition range.

7. Do not allow conductive foreign matter such as screws or metal chips, or combustible foreign 

matter such as oil enter the servo drive or servomotor.

8. Do not block the intake or exhaust ports of the servo drive of servomotor. Failure to observe this 

could result in faults.

9. The servo drive and servomotor are precision devices. Do not drop them or apply strong impacts.

10.Do not install or operate a servo drive or servomotor which is damaged or missing parts.

11.When the unit has been stored for a long time, contact the Service Center or Service Station.

12.Connect the detector(CN2/CN3) immediately after the installation of the servo drive unit. In 

addition, when a battery box is used, immediately connect to the BTA/BTB connector. (prevention 

of absolute position data lost)