Mitsubishi Electronics AJ65bt-r2 ユーザーズマニュアル
5 - 45
MELSEC-A
5 PRELIMINARY INFORMATION
1) Program to change to bank 0
Specify partial
refresh
refresh
Specify bank 0
Execute partial
refresh
refresh
2) Program to change to bank 1
Specify partial
refresh
refresh
Specify bank 1
Execute partial
refresh
refresh
(b) When using dedicated commands (RIWT) with QCPU (Q
mode) / QnACPU
When using dedicated commands (RIWT/RISEND), RY(n+1)E and
RY(n+1)F are used with the dedicated commands, so provisions must be
made to prevent the user from rewriting this signal information.
When the QCPU (Q mode) is used, such provisions need not be made.
Refer to section 5.3(8) for details.
RY(n+1)F are used with the dedicated commands, so provisions must be
made to prevent the user from rewriting this signal information.
When the QCPU (Q mode) is used, such provisions need not be made.
Refer to section 5.3(8) for details.
Write execution
Write execution
No. of write points
Write data
Set R2 station No.
Access code, attribute
R2 buffer memory address