Mitsubishi Electronics FX3S-5DM ユーザーズマニュアル
16 Display Module (FX3S-5DM)
172
FX
3S
Series Programmable Controllers
User's Manual - Hardware Edition
16.9 Specified Device Monitor Function
16.9.5 Specified device editing function
Devices displayed in the specified device monitor function can be edited.
1. System signal 1
*1.
Maximum or minimum value of the corresponding device if the device number is set outside the
allowable range
allowable range
Refer to Subsection 16.9.1 for system signal 1.
2. System signal 2
1) Operation of [M
]
ON
: Enables the device editing function
OFF : Disables the device editing function
When the edition request turns ON, bit devices (Y, M and S) can be forcibly turned ON or OFF, and the
current value/set value of word devices (D, T and C) can be edited.
The operation is same as the test mode operation of monitor/test.
current value/set value of word devices (D, T and C) can be edited.
The operation is same as the test mode operation of monitor/test.
Refer to Subsection 16.9.1 to 16.5.6 for operation of monitor/test.
2) Operation of [M
+1]
Turns ON after completion of a test operation for a specified device monitor (or when the [OK] or [ESC]
button operated).
To turn OFF, the request edit of a specified device monitor is turned off or it is turned off in the user’s
program.
button operated).
To turn OFF, the request edit of a specified device monitor is turned off or it is turned off in the user’s
program.
Special data register
System Information
Description
D8158=K
D
Device type to be displayed
D
+1
Device No. to be displayed
*1
Special data register
System Information
Description
D8159=K
M
Request edit of specified device monitor
M
+1
Edition completion response of specified device monitor