ZyXEL Communications 4.6 ユーザーズマニュアル
Chapter 7 Storage
Media Server User’s Guide
158
7.4.1 Scanning a Volume
Select a volume in the Storage > Volume screen (
) and click Scan to
open the following screen. Use this screen to scan the volume for errors and select whether or not
to have the NSA automatically repair them.
to have the NSA automatically repair them.
Figure 61
Storage > Volume > Scan
The following table describes the labels in this screen.
7.5 Creating an External (USB) Volume
Click the Create a New External Volume button (or the Create a USB
Volume button
depending on your model) in the Storage screen as shown in
to open the
following screen. Use this screen to create a new NSA external disk drive volume.
Table 25
Storage > Volume > Scan
LABEL
DESCRIPTION
Auto File Repair
Select this to have the NSA automatically attempt to repair any errored files it detects
during the scan. This may also result in the NSA finding some files and placing them in the
Lost and Found share.
during the scan. This may also result in the NSA finding some files and placing them in the
Lost and Found share.
The rest of the screen shows which users are currently connected to the NSA. They will be
disconnected if you perform the scan.
disconnected if you perform the scan.
Type
This shows whether it’s a Windows/CIFS, web (Web Configurator), or FTP connection to the
NSA.
NSA.
Share Name
This displays the shared folder name on the NSA that the user is connected to for CIFS
sessions and is blank for FTP and web sessions.
sessions and is blank for FTP and web sessions.
Username
This displays the name of the user connected to the NSA if one is defined. ANONYMOUS
FTP displays if a username is not defined for the user’s connection.
FTP displays if a username is not defined for the user’s connection.
IP Address
This displays the IP address of the computer
connected to the NSA.
Apply
Click this to have the NSA scan the volume.
Cancel
Click this to close this screen without scanning the volume.