ZyXEL Communications 4.6 ユーザーズマニュアル
Chapter 2 NAS Starter Utility
Media Server User’s Guide
23
2.4 Main NAS Starter Utility Screen
The main NAS Starter Utility screen displays after you select an NSA in the NSA Seeker screen.
Figure 4
NAS Starter Utility Main Screen
The following table describes the labels in this screen.
Table 3
NAS Starter Utility Main Screen
LABEL
DESCRIPTION
?
Click this to display the utility help.
Configuration
Click this to run the initialization wizard (see the utility help for details), configure system
settings (see
settings (see
), or go to the NSA’s Web Configurator login screen
(see
NAS Seeker
Click this to use the NSA Seeker screen (
) to find and connect to a
different NSA on your network.
Server Name
This is the server name you configured for the NSA. If you have more than one NSA in
your network, it is recommended that you give each one a unique name for identification
purposes.
your network, it is recommended that you give each one a unique name for identification
purposes.
IP Address
This is the current IP address of the NSA.
MAC Address
This is the NSA’s unique physical hardware address (MAC).
Firmware Version
This shows the version of firmware the NSA is currently using.
Status
This shows whether the NSA is Online, Uninitialized, Unreachable, Configuring, or
Config Failed.
Config Failed.
Run Initialization
Wizard
Wizard
This button displays if the NSA detects an installed hard disk that the NSA has not yet
configured. Click the button to run the initialization wizard (see the utility help for
details).
configured. Click the button to run the initialization wizard (see the utility help for
details).