ZyXEL Communications 4.6 ユーザーズマニュアル

Chapter 2 NAS Starter Utility

Media Server User’s Guide

Click Configuration > System Setting in the main utility screen to display the following screen.

NAS Starter Utility > Configuration > System Setting  

The following table describes the labels in this screen.   

NAS Starter Utility > Configuration > System Setting

Server Name

Specify a name to uniquely identify the NSA on your network. You can enter up to 15 
alphanumeric characters with minus signs allowed but not as the last character. The 
name must begin with an alphabetic character (a-z) and is case sensitive. 

Time Zone

Choose the time zone of your location. This will set the time difference between your 
time zone and Greenwich Mean Time (GMT). 

Enable PPPoE 
Connection

Click this if your Internet connection requires you to enter a user name and password to 
connect to the Internet. Enter your user name and password

Automatically get 
IP address

Select this if the NSA is automatically assigned an IP address from the ISP or a DHCP 
server in your network. 

Manually assign IP 
address

Select this if you want to assign the NSA a fixed IP address, subnet mask and default 
gateway.

Note: Do not configure an IP address that is already in use in your network. This results to 

a network IP address conflict and makes the NSA inaccessible.

Use from DHCP 
server 

Domain Name System (DNS) is for mapping a domain name to its corresponding IP 
address and vice versa. Select this if the NSA is automatically given DNS information 
from the ISP or a DHCP server in your network. 

DNS

Domain Name System (DNS) is for mapping a domain name to its corresponding IP 
address and vice versa. 

Select Use from DHCP server if the NSA is automatically given DNS information from 
the ISP or a DHCP server in your network. 

Select Manually assign DNS server if you were given specific IP address(es) of the 
DNS server(s). Enter the primary and secondary DNS in the corresponding fields.