ECS 945GCD-M 89-206-R15101 ユーザーズマニュアル
製品コード
89-206-R15101
32
Using BIOS
Advanced Chipset Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
with caution. Any changes can affect the operation of your computer.
Configure DRAM Timing by SPD (Enabled)
Press <Esc> to return to the main menu setting page.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Chipset Setup
DRAM Frequency
Auto
Configure DRAM Timing by SPD
Enabled
DVMT Mode Select
DVMT Mode
DVMT/FIXED Memory
128MB
HPET
Enabled
Help Item
Options
Auto
400 MHz
533 MHz
400 MHz
533 MHz
DRAM Frequency (Auto)
This item enables users to adjust the DRAM frequency. The default setting is auto and
we recommend users leave the setting unchanged. Modify it at will may cause the
system to be unstable.
This item enables users to adjust the DRAM frequency. The default setting is auto and
we recommend users leave the setting unchanged. Modify it at will may cause the
system to be unstable.
DVMT Mode Select (DVMT Mode)
When set to Fixed Mode, the graphics driver will reserve a fixed portion of the
system memory as graphics memory, according to system and graphics requirements.
system memory as graphics memory, according to system and graphics requirements.
HPET (Enabled)
This item enables or disables HPET (High Precision Event Timer) support.
mnlk
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Optimized Defaults
F1: General Help
DVMT/FIXED Memory (128MB)
This item allows you to remap the overlapped PCI memory above the total physical
memory if you have a 64 bit OS and 8 GB of RAM.
memory if you have a 64 bit OS and 8 GB of RAM.
When this item is set to enable, the DDR timing is configured using SPD. SPD (Serial
Presence Detect) is located on the memory modules, BIOS reads information coded
in SPD during system boot up.
Presence Detect) is located on the memory modules, BIOS reads information coded
in SPD during system boot up.