Motorola 2000X ユーザーズマニュアル
16
PageWriter 2000X User’s Guide
To recharge the battery outside of the pager:
1. Insert the transformer’s round connector into the back of the
charger.
2. Insert the transformer’s two-pronged plug into any standard
120 Vac power supply outlet.
3. Place the 3.6 V NiMH battery in the charger’s battery compart-
ment by aligning the positive (+) and negative (-) markings on
the battery with those on the charger.
the battery with those on the charger.
4. Press the battery firmly into place. The lit red LED indicator
light means that the battery is charging.
A flashing red LED indicator means the battery is not making
a good contact. Ensure the pager is properly seated in the
charger.
a good contact. Ensure the pager is properly seated in the
charger.
5. When the green LED indicator becomes lit, the battery is fully
charged. Remove the battery from the front of the charger.
TIP
Leaving the battery in the charger after the LED turns green
keeps the battery fully charged until removed. Keep your
spare battery fully charged by leaving it in your plugged-in
charger.
keeps the battery fully charged until removed. Keep your
spare battery fully charged by leaving it in your plugged-in
charger.
Transformer
Two-pronged Plug
Two-pronged Plug
Transformer
Round Connector
Round Connector
Battery
Compartment
Compartment
How Your PageWriter 2000X Pager Works
17
To replace the battery:
1. Match the positive (+) marking on the fresh battery with the
two (2) contact side of the pager’s battery compartment and the
negative (-) marking with the one (1) contact side of the battery
compartment.
negative (-) marking with the one (1) contact side of the battery
compartment.
2. Insert the battery into the battery compartment at an angle
toward the outer edge of the pager, then press the battery down
into place.
into place.
Ensure the lift tab is underneath, not on top of, the battery. The
tab is designed to help lift the battery out of the compartment
during battery removal.
tab is designed to help lift the battery out of the compartment
during battery removal.
3. Fold the protruding lift tab down on top of the battery, then
slide the battery door back into place. An audible click can be
heard when the door is securely closed.
heard when the door is securely closed.
The Infrared Port
The PageWriter 2000X Two-Way Wireless Communications
Center includes an infrared (IR) port in the charger housing.
This device is used as a docking station for your pager when
transferring data to and from your computer. The IR port on
the docking station with the IR port on your PageWriter
2000X Two-Way Wireless Communications Center, enabling
data transmission. The docking station is connected to your
computer with the Motorola-provided RS232 null modem
cable.
When a data transfer is in process between the pager and a
PC, the green and red LED indicator lights on the PageWriter
2000X pager will flash intermittently.
Center includes an infrared (IR) port in the charger housing.
This device is used as a docking station for your pager when
transferring data to and from your computer. The IR port on
the docking station with the IR port on your PageWriter
2000X Two-Way Wireless Communications Center, enabling
data transmission. The docking station is connected to your
computer with the Motorola-provided RS232 null modem
cable.
When a data transfer is in process between the pager and a
PC, the green and red LED indicator lights on the PageWriter
2000X pager will flash intermittently.