Motorola BRAVO PLUS ユーザーズマニュアル
User’s Guide
BRAVO PLUS
A
®
2
INTRODUCTION
Congratulations on your purchase of a Motorola BRAVO
PLUS numeric display pager. This compact pager has
been designed with simple-to-use operating buttons, rug-
ged housing, and an easy-to-read display.
PLUS numeric display pager. This compact pager has
been designed with simple-to-use operating buttons, rug-
ged housing, and an easy-to-read display.
The BRAVO PLUS pager fits easily in your pocket or
purse, or can be worn on your belt.
purse, or can be worn on your belt.
The BRAVO PLUS pager offers a number of features. We
encourage you to read this instruction manual carefully to
obtain the full benefits from your BRAVO PLUS pager.
encourage you to read this instruction manual carefully to
obtain the full benefits from your BRAVO PLUS pager.
CONTROLS
Read Button (
R
) – Used to read messages and to acti-
vate pager functions. Also used to scroll through the hours
and minutes for time setting.
and minutes for time setting.
Menu Button (
F
) – Used to scroll through the pager
menus and set the time of day.
BRAVO PLUS
Menu (
F
)
Button
Alert
Lamp
Read (
R
)
Button
On/Off
Switch
Switch
#$%
Side
View
Switch
3
On/Off Switch – This three-position slide switch is used to
turn the pager on and off, acts as a master reset button,
and activates the backlight.
turn the pager on and off, acts as a master reset button,
and activates the backlight.
Alert Lamp – Flashes to give a visual indication when a
message is received.
message is received.
TURNING THE PAGER ON
SILENT Mode: Slide the On/Off Switch in an upward direc-
tion to the SILENT symbol (
tion to the SILENT symbol (
$
). The pager vibrates (if
equipped) and the lamp flashes for 4 seconds.
ON Mode: Slide the On/Off Switch in an upward direction
to the ON symbol (
to the ON symbol (
#
). The pager emits an interrupted beep
and the lamp flashes for 4 seconds.
A full-segment display accompanies the power-up alert.
The display then changes to the standby screen.
Standby Screen in SILENT Mode
Standby Screen in ON Mode
888888888888
8:59a
D 8:59a
4
SETTING THE TIME
• To set the time, press
F
until
seTr Trime
is displayed,
then press
R
.
• The hours digits (represented by the grey characters in
the sample shown below) begin to blink.
Set the hours digits by pressing
R
until the correct hour
is displayed along with the appropriate
a
(for A.M.) or
p
(for P.M.) symbol. Keep pressing
R
to cycle through the
hours from A.M. to P.M. When the correct hour (A.M. or
P.M) is displayed, press
P.M) is displayed, press
F
to adv ance to the minutes
digits.
• The first digit of the minutes (represented by the grey
character) begins to blink. Press
R
to change the first
digit of the minutes. Press
F
to advance to the second
digit of the minutes. Press
R
to change the second digit
of the minutes. Press
F
one more time to leave the time
setting function.
• All portions of the time of day screen, except the colon
(
:
), stop blinking. The time of day is now set and the
pager is in the standby mode.
12
:00a
8:
0
0a