Fortinet 4.0 MR1 ユーザーズマニュアル

end

end

Configure PBX system settings that affect the overall performance of the PBX service and 
all of the users of it. Settings include the extension pattern for the PBX, the outgoing dial 
prefix and the email server to use for sending voicemail notification email messages. 
Usually you would configure these settings once and rarely thereafter.
To configure PBX settings group, go to PBX > Calling Rules > Setting, make configuration 
changes as required and then select Apply. 

Enter a pattern that defines the valid extensions that can be added to the 

FortiGate Voice configuration. The pattern can include numbers that must be 

in every extension and upper case Xs to indicate the number of digits. The 

extension range can only contain numbers and the letter X.
•

If you add numbers to the extension range, all extensions added to this 

FortiGate Voice unit must include the same numbers in the same location 

in the extension number. For example, if you include a 6 as the first digit, 

all extensions added this FortiGate Voice unit must begin with the number 

6.

•

The Xs indicate the number of digits in addition to the required number 

that each extension must have. For example, 6XXX indicates the 

extensions must start with the number 6 and be followed by any three 

numbers.

Usually you would add one or two numbers to the start of the extension range 

to identify the extensions for this PBX and follow this with enough Xs to be 

able to add the required number of extensions. 
The extension range should not begin with the same number as the outgoing 

prefix.

Enter the international country calling code for the country or region in which 

you are installing the FortiGate Voice unit.

Enter the local area code for the country or region in which you are installing 

the FortiGate Voice unit.