Fortinet 4.0 MR1 ユーザーズマニュアル

Use this command to add and configure the extension groups. An extension group here is 
referred to a ring group and is a group of extensions that can be called using one number. 
You can configure the ring group to call all of the extensions in the group at the same time 
or to call the extensions one at a time until someone answers.

country-area 
<country_name>

Enter the name of the country in which the FortiGate Voice 

unit is installed.

USA

extension-pattern 
<extension_pattern>

Enter a pattern that defines the valid extensions that can 

be added to the FortiGate Voice configuration. The pattern 

can include numbers that must be in every extension and 

upper case Xs to indicate the number of digits. The 

extension range can only contain numbers and the letter 

X.
•

If you add numbers to the extension range, all 

extensions added to this FortiGate Voice unit must 

include the same numbers in the same location in the 

extension number. For example, if you include a 6 as 

the first digit, all extensions added this FortiGate Voice 

unit must begin with the number 6.

•

The Xs indicate the number of digits in addition to the 

required number that each extension must have. For 

example, 6XXX indicates the extensions must start with 

the number 6 and be followed by any three numbers.

Usually you would add one or two numbers to the start of 

the extension range to identify the extensions for this PBX 

and follow this with enough Xs to be able to add the 

required number of extensions. 
The extension range should not begin with the same 

number as the outgoing prefix.

null

local-area-code 
<code_string>

Enter the local area code for the country or region in which 

you are installing the FortiGate Voice unit.

408

max-voicemail 
<max_length_seconds>

Limit the length of voicemail messages in seconds. Set to 

0 for no limit.

60

outgoing-prefix 
<pattern_str>

The number that PBX users must dial to get an outside 

line. For example, if users should dial 9 to get an outside 

line, add 9 to this field. The outgoing prefix should not be 

the same as the first number of the extension range.

9

ring-timeout 
<time_int>

The number of seconds that an extension should be 

allowed to ring before going to voicemail.

20

rtp-hold-timeout 
<time_int>

The amount of time in seconds that the extension will wait 

on hold for RTP packets before hanging up the call. 0 

means no time limit.

0

rtp-timeout 
<time_int>

The amount of time in seconds during an active call that 

the extension will wait for RTP packets before hanging up 

the call. 0 means no time limit.

60

voicemail-extension 
<access_number>

Enter the voicemail extension number that a user will use 

to access their voicemail inbox. 

No 

default

Note: The order in which the members are added to the ring group does not match the 
order in which the FortiGate Voice unit calls them.