Cobra Electronics PR150 A プリント

Press and release to enter

mode functions to change
channels or privacy codes.

The channel numbers or
privacy code numbers will
blink when that mode is
selected. Use the Up/Down
buttons to select a channel 
or privacy code.

o

Operation

Customer
Assistance

Warranty

Notice

ons

This two-way radio operates on GMRS (General Mobile Radio Service) frequencies

which require an FCC (Federal Communications Commission) license. A user must 

be licensed prior to operating on Channels 1 through 7 or 15 through 22, which

comprise the GMRS channels of this radio. Serious penalties could result for

unlicensed use of GMRS channels, in violation of FCC rules, as stipulated in 

the Communications Act’s Sections 501 and 502 (amended). 

Licensed users will be issued a call sign by the FCC, which should be used for 

station identification when operating this radio. GMRS users should also cooperate 

by engaging in permissible transmissions only, avoiding channel interference with

other GMRS users, and being prudent with the length of their transmission time. 

For licensing information and application forms, please call the FCC Hotline at 

800-418-FORM. Request form #159 and form #605. Questions regarding the 

license application should be directed to the FCC at 888-CALL-FCC. Additional

information is available on the FCC’s website at www.fcc.gov.

Your wireless handheld portable transceiver contains a low power transmitter. 

When the talk button is pushed, it sends out radio frequency (RF) signals. 

The device is authorized to operate at a duty factor not to exceed 50%. 

In August 1996, the Federal Communications Commission (FCC) adopted 

RF exposure guidelines with safety levels for handheld wireless devices. 

FCC RF Exposure Requirements: For body-worn operation, this radio has 

been tested and meets the FCC RF exposure guidelines when used with Cobra

accessories supplied or designated for this product. Use of other accessories 

may not ensure compliance with FCC RF exposure guidelines. Use only the 

supplied antenna. Unauthorized antennas, modifications, or attachments 

could damage the transmitter and may violate FCC regulations. 

Hold the transmitter approximately two inches from your face and 

speak in a normal voice, with the antenna pointed up and away.

If you have any questions about operation or installing your new Cobra product, 

or if you are missing parts… 

If your product should require factory service, please call Cobra first before 

sending your radio, charger or battery pack(s). This will ensure the fastest turn-

around time on your repair. You may be asked to send your products to the Cobra

factory. It will be necessary to furnish the following to have the product serviced 

and returned. 1) For warranty repair include some form of proof-of-purchase, 

such as a mechanical reproduction or carbon of a sales receipt. If you send the 

original receipt, it cannot be returned. 2) Send the entire product. 3) Enclose 

a description of what is happening with the product. Include a typed or clearly 

printed name and address of where the product is to be returned. 4) Pack product

securely to prevent damage in transit. If possible, use the original packing material.  

5) Ship prepaid and insured by way of a traceable carrier such as United Parcel 

Service (UPS) or Priority Mail to avoid loss in transit to:

Cobra Factory Service

Cobra Electronics Corporation

6500 West Cortland Street

Chicago, Illinois 60707 U.S.A.  

6) If the product is in warranty, upon receipt of your product it will either be 

repaired or exchanged depending on the model. 

Please allow approximately three to four weeks before contacting Cobra 

for status. If the product is out of warranty, a letter will automatically be sent 

informing you of the repair charge or replacement charge. If you have any 

questions, please call 773-889-3087 for assistance.

Please contact your local dealer for product service information.

Cobra Electronics Corporation warrants that its Cobra GMRS radios and charger, and the

component parts thereof, will be free of defects in workmanship and materials for a period

of one year from the date of first consumer purchase. This warranty may be enforced by

the first consumer purchaser, provided that the product is utilized within the U.S.A. 

Cobra will, without charge, repair or replace, at its option, defective GMRS radios, 

chargers, products or component parts upon delivery to the Cobra Factory Service

department, accompanied by proof of the date of first consumer purchase, such as 

a duplicated copy of a sales receipt. 

You must pay any initial shipping charges required to ship the product for warranty

service, but the return charges will be at Cobra’s expense, if the product is repaired 

or replaced under warranty. This warranty gives you specific legal rights, and you 

may also have other rights which may vary from state to state.

1) To any product damaged by accident; 2) In the event of misuse or abuse of the product

or as a result of unauthorized alterations or repairs; 3) If the serial number has been

altered, defaced, or removed; 4) If the owner of the product resides outside the U.S.A.

All implied warranties, including warranties of merchantability and fitness for a

particular purpose are limited in duration to the length of this warranty. Cobra shall 

not be liable for any incidental, consequential or other damages; including, without

limitation, damages resulting from loss of use or cost of installation. 

Some states do not allow limitations on how long an implied warranty lasts and/or 

do not allow the exclusion or limitation of incidental or consequential damages, 

so the above limitations may not apply to you.

Please contact your local dealer for warranty information.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions: 1) This
device may not cause harmful interference, and 2) this device
must accept any interference received, including interference 
that may cause undesired operation.

FCC Warnings: Replacement or substitution of transistors,
regular diodes or other parts of a unique nature, with parts other
than those recommended by Cobra may cause a violation of the
technical regulations of part 95 of the FCC rules, or violation of
type acceptance requirements of part 2 of the rules.

Intro

Operation

Customer
Assistance

Warranty

Notice

Main Icons

Secondary Icons

Press and hold to turn the

radio on or off.

Remove belt clip and battery
compartment cover. Insert 
battery pack as indicated on 
battery pack. Replace cover 
and belt clip.

NOTE  Radio can also be used with three AAA
alkaline batteries. Position batteries according 
to polarity markings in radio. Alkaline batteries
cannot be recharged.

Insert battery pack into radio 
according to directions above,
then insert radio into charger. 
Insert round connector into the 
back of the charger and plug into 

an electrical outlet. If the charging light is not on,
check position of the radio. The radio should be upright.

It normally takes about eight hours to fully recharge a
NiCD battery pack. Battery packs will not be damaged if
they stay in the charging well longer than that.

While in mode functions,

press and release to change
channels or privacy codes.

Press and release to adjust
the volume.

While in Standby mode or when selecting a

channel, shows current channel (1 through 22).

When adjusting the volume, shows current level

(1 through 7).

While in Standby mode,
shows current privacy 
code (00 through 38).

“CH” is visible when 

selecting a channel.

“LE” is visible when 

adjusting volume.

Visible when 
receiving a message.

Visible when 
transmitting a message.

Blinks when battery power level is low.

Your microTALK

®

radio has a unique circuit

designed to extend battery life. If there are no

transmissions within 10 seconds, the radio will
automatically switch to Battery Save mode. This

will not affect the radio’s ability to receive

incoming transmissions.

CB Radios  •  microTALK

®

Radios  •  Radar/Laser Detectors  •  Safety Alert

®

Traffic Warning Systems  •

Handheld GPS Receivers  •  Mobile GPS Navigation Systems  •  HighGear

®

Accessories  •  

CobraMarine™ VHF Radios  •  Power Inverters  •  Accessories

P

ri

n

te

d

in

th

e

P

h

il

ip

p

in

e

s

P

a

rt

N

o

.

4

8

0

-2

0

5

-P

V

e

rs

io

n

A

Intro

Operation

Customer
Assistance

Warranty

Notice

Main Icons

Secondary Icons

Press and hold to communicate with

others. With the microphone about
two inches (five cm) from your mouth,
speak in a normal voice. 

Release the Talk button when you are
finished talking and listen for a response.
You cannot receive incoming calls
while pressing the Talk button.

NOTE Both radios must be tuned
to the same channel and privacy
code to communicate.

Intro

Operation

Customer
Assistance

Warranty

Notice

Main Icons

Secondary Icons

Press and release to alert

others that you are calling.

Communicating with others while hiking, biking, 
and working; keeping track of family and friends 
at a crowded public event; checking with travel
companions in another car; talking with neighbors;
arranging meeting spots with others while 
shopping at the mall.

In this user’s guide, you should find all the information you need to operate your microTALK

®

radio. If you require 

further assistance after reading this guide, Cobra

®

Electronics offers the following customer assistance services:

Automated Help Desk English only. 
24 hours a day, 7 days a week 773-889-3087 (phone). 

Customer Assistance Operators English and Spanish. 
8:00 a.m. to 6:00 p.m. CT, Monday through Friday 
(except holidays) 773-889-3087 (phone). 

Questions English and Spanish. 
Faxes can be received at 773-622-2269 (fax). 

Technical Assistance
English only. www.cobra.com 
(on-line: Frequently Asked Questions). 
English and Spanish. productinfo

@

cobra.com (e-mail).

Cobra

®

, microTALK

®

, Nothing comes close to a Cobra

®

and the snake design are

registered trademarks of Cobra Electronics Corporation, U.S.A. Cobra Electronics

Corporation™ is a trademark of Cobra Electronics Corporation, U.S.A.