Cobra Electronics PR240 ユーザーズマニュアル

Customer

Assistance

Warranty

Introduction

comes close to a Cobr

a

™

1.

Press the 

or V

button.

A double beep sound is used to indicate 
the minimum and maximum volume levels 
(L1 through L7).

1. Pr

ess and release the 

Call button.

The other person will hear a two (2) 
second call tone. You cannot send or 
receive transmissions during the two (2) 
second call tone.

See page 13 on how to select 
between ten (10) call tone settings.

Y

ou can use your microTALK

®

radio to listen to

NOAA All Hazards Radio channels transmitting
in your area.
You can also program your microTALK

®

radio to sound a tone alert when a local NOAA
channel activates an Emergency All Hazards 
Alert. This will warn you of weather, chemical, 
and other civilian emergencies.

*National Oceanographic and Atmospheric Administration

CTCSS (Continuous T

one Coded Squelch System)

is an advanced tone coding system allowing you
to select one of 38 privacy codes to reduce
interference from other users on the channel.

If you are using a privacy code, both
radios must be tuned to the same channel
and privacy code to communicate. Each
channel will remember the last privacy
code you selected.

1.

After selecting a channel, press the 

button until the small numbers next to the

channel number flash on the LCD.

2. Press the 

Channel Up or Channel Down button

to select a privacy code. You can hold the 

or Down button for fast advance.

3. When your desired privacy code is displayed:

a. Press the 

Mode button to enter the new

setting and proceed to other functions.

b. Press the 

Lock button to enter the new

setting and return to 

Standby Mode.

c. Do not press any buttons for 15 seconds 

to enter the new setting and return to

Standby Mode.

1.

Release the 

button to r

eceive incoming

transmissions. Your microTALK

®

radio is

always in 

Standby Mode while the T

or

Call buttons ar

e not pressed.