Winegard MS-2002 ユーザーズマニュアル

The Winegard Company warrants this Winegard product against any defects in materials or workmanship within 90 (ninety) days from date of purchase. 

No warranty claim will be honored unless at the time the claim is made, you present proof of purchase to an authorized Winegard dealer (if unknown, please 

contact Winegard Company, 3000 Kirkwood Street, Burlington, IA 52601-2000, Telephone 800-288-8094).

Winegard Company (at its option) will either repair or replace the defective product at  no charge to you. This warranty covers parts, but does not cover  any 

costs incurred in removal, shipping or reinstallation of the product. The warranty does not extend to products which have been subjected to misuse, improper 

installation, or to damage caused by wind, lightning, ice or other occurrences over which the manufacturer has no control.

The 90 Day Warranty is provided on the condition that  the equipment is properly delivered with all handling and freight charges prepaid to your Winegard  

dealer for return to our factory for repair or replacement. Winegard dealers will arrange for the replacement or repair and return to you without charge the product 

which failed due to defective material or workmanship.

WINEGARD COMPANY WILL NOT ASSUME ANY LIABILITIES FOR ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, MADE BY ANY OTHER 

PERSON.

ALL OTHER WARRANTIES WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE 

AND MERCHANTABILITY ARE LIMITED TO THE 90-DAY PERIOD OF THIS WARRANTY.

The foregoing shall be the sole and exclusive remedy of any person, whether in contract, tort or otherwise, and Winegard shall not be liable for incidental 

or consequential damage or commerical loss, or from any other loss or damage except as set forth above.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of limitation of incidental or consequential damages, so the 

above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Mount  lightning  arrestor  as  close  as 

possible to where lead-in enters house.

Ground  wires  for  both  mast  and  lead-

in  should  be  copper  or  aluminum  wire, 

number 8 or larger.

Lead-in  wire  from  antenna  to  lightning 

arrestor and mast ground wire should be 

secured to house with stand-off insulators, 

spaced from four to six feet apart.

In  the  case  of  a  “ground  up”  antenna 

installation,  it  may  not  be  necessary  to 

ground the mast if the mast extends four 

or more feet into the earth. Consult your 

TV service man for proper depth in your 

area.

WALL MOUNT

ROOF MOUNT

ATTIC MOUNT

Ground conductors

(NEC section 810-21)

Antenna discharge unit

(NEC section 810-20)

Ground Clamps

Power service grounding 

electrode system

(NEC ART 250, part H

Antenna lead in wire

Ground Clamp

Electrical service 

equipment

NEC - National Electrical Code

Rev. 2/08