LOEWE Individual 32 Compose 3D ユーザーズマニュアル

- 26

If you have not selected a DVB-C antenna in the antenna 
selection: Continue with Setting options for DVB-S recep-

tion (see right hand column).
The normal DVB-C settings are derived from the selection 
of the location and do not need to be changed.

  Select and adapt settings for DVB-C reception.

 You can state whether coded stations are to be searched 

for in the search/update. 

Select 

 to save all found 

scrambled stations. However, these stations can only be 
received in connection with a CA module and the appro-
priate Smart Card.

 Handling of the CA module is described 

on page 61.
If a CA module with a SmartCard is already plugged in for 
the station search, all the stations which this module can 
descramble are also saved when no is preset.

 If you want to run the station search independently of 
the channel grid, select frequency search for the search 
method.

 The DVB stations are only searched for in the frequency 
range above the start frequency.

 Only change these defaults if you are familiar with other 
symbol rates and types of modulation or if you have to 
specify the network ID for your cable network. In the 
case of small cable networks fed directly from the satel-
lite, the rate of 6900 might have to be replaced by 6111. 
Your cable provider has the information you need.

  OK  Proceed.

If you have not selected a DVB-S antenna in the antenna 

selection: Continue with Setting options for all types of 

reception on page 30.
The normal DVB-S settings are derived from the selection 

of the location and do not need to be changed in most 

cases.

 Selecting the satellite system.

     Specify how you receive which satellite(s) (single 

satellite or type of satellite system). Ask your dealer 

if required.

Reception of a single satellite via a connected LNC (LNB). 

See page 27 for settings.

Reception of two different satellites with two LNCs (LNBs) 

which are connected to the TV set by a 22 kHz switchbox. 

See page 27 for settings.

 Reception of two different satellites with two LNCs (LNBs) 

which are connected to the TV set by a toneburst switch. 

See page 27 for settings.

The TV set controls a DiSEqC multiswitch to which up to 

four LNCs (LNBs) for different satellites are connected. 

See page 28 for settings.

Select setting if the TV set is connected to a DiSEqC 

single-cable system (according to EN 50494). Several Sat 

receivers can be connected to one Sat cable. See page 

28 for settings.

Select setting if the TV set is connected to a single-cable 

system (without DiSEqC). Several Sat receivers can be 

connected to one Sat cable. Unlike a DiSEqC single-cable 

system there are restrictions in the range of certain recep-

tion frequencies in single-cable community systems. See 

page 29 for settings.

  OK  Proceed 

    (to the appropriate page of the satellite system).

OK

INITIAL INSTALLATION (DVB-C)

Scrambled 

stations    

 

no 

      

                yes

Search 

method      

 

Channel 

search

Start 

frequency 

     

 

047.0 

MHz 

Network 

ID 

       

 

none

Symbol rate 1 (DVB-C)      6875
Symbol rate 2 (DVB-C)      6900
QAM modulation 1         64
QAM modulation 2         256

Proceed

Settings

 Encrypted 

stations

Search

method

Start 

frequency

Network ID

Symbol rate

QAM

modulation

OK

OK

INITIAL INSTALLATION (DVB-S)
Select satellite installation

Single satellite 

2 satellites on 22 kHz switchbox
2 satellites on toneburst switch
Max. 4 satellites on DiSEqC multiswitch
DiSEqC one cable communal system
other communal installation

Proceed                                                                Back

 Select 

satellite 

installation

Single

satellite

2 satellites 

on 22 kHz 

switchbox

2 satellites 

on toneburst 

switch

Max. 4 

satellites 

on DiSEqC 

multiswitch

DiSEqC 

one cable

communal 

system

other 

communal 

installation

Initial installation