Cobra Electronics PR350WX ユーザーズマニュアル

Customer

Assistance

Warranty

Introduction

comes close to a Cobr

a

™

1.

Press the 

Mode button until the W

eather

(All Hazards Radio) icon and the currently 
selected All Hazards Radio channel are
displayed.

2. Use the 

or Channel

button to change All Hazar

ds Radio channels.

3. Weather (All Hazards Radio) icon will continue

to be displayed when All Hazards Radio is On.

a. Press the 

Mode button to pr

oceed

to other functions.

b. Press the 

Lock button to exit All Hazar

ds

Radio channel mode and return to 

Standby Mode.

1.

Press the 

Mode button until the Aler

t icon

flashes and the current On or Off setting is
displayed.

2. Press the 

or Channel

button

to turn All Hazards Alert On or Off.

3. Alert icon will continue to be displayed when

All Hazards Alert is On.

a. Press the 

Mode button to enter the new

setting and proceed to other functions.

b. Press the 

Lock button or do not pr

ess any

buttons for 15 seconds to enter the new
setting and return to 

Standby Mode.

c. Press the 

button to keep original

settings and return to 

Standby Mode.

Y

our microTALK

®

radio can automatically scan

main channels (1 through 22) or the privacy codes
(00 through 38) within one (1) main channel.

1.

Press the 

Mode button until the Scan icon and

the main channel number flashes on the display.

2. Press the 

or Channel

button

to begin scanning the main channels.  

The radio ignores privacy codes while
scanning main channels.

3. The Scan icon will continue to be displayed

when Scan is On. Your radio will continue to
scan all main channels and stop if an incoming
transmission is detected.Your radio will remain
on that channel for ten (10) seconds. 
During this time, you can:

a. Press and hold the 

button and communicate

with others. Your radio will remain on that
channel and return to 

Standby Mode.

b. Press the 

or Channel

button to r

esume scanning channels.

c. Press the 

Mode button to pr

oceed to

privacy code scanning (see page 12 
for further details).

If you press the 

button while scanning, 

and not within ten (10) seconds of receiving 
a transmission, you will transmit on the last
channel you transmitted or received on.
If you do not press any button within ten (10)
seconds, your radio will automatically resume
scanning main channels.