Cobra Electronics PR350WX ユーザーズマニュアル

Customer

Assistance

Warranty

Introduction

comes close to a Cobr

a

™

By scr

olling through the Mode function, you will

be able to select or turn On preferred features of
your microTALK

®

radio. When scrolling through

the Mode function, your radio features will be
displayed in the same predetermined order:

PR 240
Set Privacy Code

Set Channel Scan
Set Privacy Code Scan
Set Call Tones
Set “Roger Beep” On/Off

PR 350 WX
Set Privacy Code

Set NOAA All Hazard Radio Channels
Set NOAA All Hazard Alert 
Set Channel Scan
Set Privacy Code Scan
Set Call Tones
Set “Roger Beep” On/Off

1.

With the radio On, select any of the 
22 channels by pressing the 

or Channel Down button.

Both radios must be tuned to the 
same channel to communicate.

Channels 1 through 7 are shared with FRS/
GMRS. Channels 8 through 14 are FRS only.
Channels 15 through 22 are GMRS only.

See page 17 for FRS/GMRS frequency
allocations and compatibility charts.

1.

Press and hold the 

Power button until you

hear a series of audible tones indicating the
radio is On.

Your microTALK

®

radio is now in 

Standby Mode,

ready to receive transmissions. The radio is
always in 

Standby Mode except when the T

,

Call or Mode buttons ar

e pressed.

When batter

y power is low, the Battery Low icon

will blink. Your batteries should be replaced or
recharged, if using rechargeable batteries.

Y

our microTALK

®

radio has a unique circuit

designed to extend battery life. If there are no
transmissions within ten (10) seconds, the radio
will automatically switch to 

and

Power Saver icon will flash in the display. 

This will not affect the radio’s ability to receive
incoming transmissions.

1. Pr

ess and hold the 

button.

2. With the microphone about two (2) inches (5 cm)

from your mouth, speak in a normal voice.

3. Release the 

button when you ar

e finished 

talking and listen for a response.

You cannot receive incoming calls while pressing 
the

button.

Both radios must be tuned to 
the same channel to communicate.