Cobra Electronics 29NW ST ユーザーズマニュアル

ページ / 24
Operation
Operation
15
14
Activating
SoundTracker
Push and release the        ST button. Red LED 
is illuminated when SoundTracker™ is 
turned on.
1
The SoundTracker
TM
System
While previous systems only “blanket out” or limit
noise in higher sound frequencies, the revolution-
ary new SoundTracker
TM
System actually reduces
noise while leaving the signal intact in the recep-
tion mode. In the transmission mode, it actually
strengthens the signal,providing you with a 
significant reduction in noise on reception 
and transmission.
Sound clarity is measured by the ratio 
of the signal level to the noise level.
The higher the signal-to-noise ratio,
the better the sound.
How SoundTracker
TM
Works
On Reception - “Cuts noise coming in”
With a normal CB, distant signals fall below
the squelch level and are unintelligible. With a
SoundTracker
TM
CB, the noise level is cut up to
90%,which increases the signal-to-noise ratio 
and dramatically improves signal clarity. This also
allows you to significantly reduce the squelch
level,which greatly expands your listening range.
On Transmission - “Strengthens signals going out”
A SoundTracker
TM
CB strengthens the transmit 
signal by more effectively using the a vailable RF
power output of the CB. The result is improved
transmission signal clarity and an expanded 
transmission range.
Note
SoundTracker™ gives you 
clearer, cleaner reception to
improve CB communications
while on the air.
Activating SoundTracker™
29 NW ST manual3.3  6/15/99 12:50 PM  Page 14