Fostex FD-4 ユーザーズマニュアル
18
Names and Functions
4
3
2
1
1
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
INPUT 3
R MON OUT L
R ST OUT L
AUX RTN 1
R
MONO/L
AUX RTN 2
R
MONO/L
2 AUX SEND 1
4 INSERT 3
INPUT 4
SCSI
OUT
IN
DATA
R
RECORDER IN
L
IN
MIDI
OUT
OUT
PUNCH
IN/OUT
DATA
MIDI
POWER
1.Input jacks [1, 2, 3, 4]
(Connector: phone)
Connect sound sources, such as musical instruments and
microphones, here.
Connect a microphone to input jacks 3 and 4, which are
equipped with TRIM switches that allow you to switch
according to the connected microphone output level. Input
channels 3 and 4 also support balanced XLR connectors on
the rear panel.
microphones, here.
Connect a microphone to input jacks 3 and 4, which are
equipped with TRIM switches that allow you to switch
according to the connected microphone output level. Input
channels 3 and 4 also support balanced XLR connectors on
the rear panel.
Front Panel (Input/Output Section)
The phone jacks for input channels 3 and 4 on the front
panel have priority. If you connect sound sources to these
jacks, the balanced XLR jacks for input channels 3 and 4 on
the rear panel will be disabled.
panel have priority. If you connect sound sources to these
jacks, the balanced XLR jacks for input channels 3 and 4 on
the rear panel will be disabled.
2.Headphone jack [PHONES]
(Connector: stereo TRS phone)
Connect headphones here. You can adjust the headphone
volume using the MASTER knob in the monitor section.
volume using the MASTER knob in the monitor section.
1. Monitor Out jacks [MON OUT L, R]
(Connector: RCA pin)
Connect monitoring speakers and amplifier or powered
speakers here. These jacks output signals selected by the
SELECTOR in the monitor section (L/R, L/R+MON, or MON).
Use the MASTER knob in the monitor section to adjust the
output level.
speakers here. These jacks output signals selected by the
SELECTOR in the monitor section (L/R, L/R+MON, or MON).
Use the MASTER knob in the monitor section to adjust the
output level.
Rear Panel (Input/Output Section)
2. Stereo Out jacks [ST. OUT L, R]
(Connector: RCA pin)
These jacks output stereo bus L/R signals. Connect these
jacks to the input jacks of a master recorder. You can adjust
the output level using the master fader L/R.
jacks to the input jacks of a master recorder. You can adjust
the output level using the master fader L/R.
4
3
2
1
R MON OUT L
R ST OUT L