Kenwood TM-G707 ユーザーズマニュアル
![Kenwood](https://files.manualsbrain.com/attachments/ac42daf651911f04136b4d8c05616678159c5c55/common/fit/150/50/30f9cfad5dc0dc630b5170bf40a934a632113bd8a7d6531073899a1c1c4c/brand_logo.png)
36
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
STORING DATA IN PM CHANNELS
1 Confirm that the following conditions have been
satisfied:
• The transceiver is in the receive mode.
• Scan is not being used.
• Microphone Control is OFF.
2 Select the desired band.
3 Select the desired frequency and related data (Tone,
CTCSS, etc.) using VFO mode.
4 If required, select another band, then select the
desired frequency and related data.
5 Press [F], [PM].
• The PM channel numbers appear and blink.
6 Press [1] to [4] corresponding to the desired PM
channel.
• The selected frequency and related data are stored in
the PM channel.
RECALLING PM CHANNELS
1 Press [PM].
• The PM channel numbers appear.
2 Press [1] to [4] corresponding to the desired PM
channel.
• The contents of the selected channel are recalled.
• The selected channel number appears and slowly
blinks.
• To exit PM Recall mode, press [PM], [PM OFF].
Note:
You cannot recall a PM memory channel while transmitting.
1
2