Kenwood TH-G71E ユーザーズマニュアル
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
26
VFO SCAN
VFO Scan allows you to scan all frequencies from the
lowest frequency to the highest frequency on the band.
The current frequency step size {page 40} is used.
lowest frequency to the highest frequency on the band.
The current frequency step size {page 40} is used.
1 Select the desired band.
2 Press [VFO] (1 s).
• The 1 MHz decimal blinks while scanning is in progress.
• Scan starts at the frequency currently displayed.
• To reverse the scan direction, turn the Tuning control
clockwise (upward scan) or counterclockwise (downward
scan).
scan).
3 To quit VFO Scan, press any key other than [LAMP],
[MONI], and [F].
Note:
The squelch must be closed for Scan to function.
MEMORY SCAN
Memory Scan allows all memory channels containing
data to be scanned.
data to be scanned.
1 Press [MR] (1 s).
• The 1 MHz decimal blinks while scanning is in progress.
• Scan starts with the channel last recalled.
• To reverse the scan direction, turn the Tuning control
clockwise (upward scan) or counterclockwise
(downward scan).
(downward scan).
2 To quit Memory Scan, press any key other than
[LAMP], [MONI], and [F].
Note:
◆
At least 2 or more memory channels must contain data and must not
be locked out.
be locked out.
◆
The squelch must be closed for Scan to function.
◆
The L0 to L9 and U0 to U9 memory channels and the priority channel
are not scanned.
are not scanned.
◆
You can also start Memory Scan when in Channel Display mode.
While Scan is being interrupted, the channel number blinks.
While Scan is being interrupted, the channel number blinks.
◆
If you select “ONE” using Menu No. 2 (MR), memory channels on
only the current band will be scanned; otherwise, memory channels
on both VHF and UHF bands will be scanned.
only the current band will be scanned; otherwise, memory channels
on both VHF and UHF bands will be scanned.