Radio Shack 20-501 ユーザーズマニュアル

41 

Beyond the Basics

You can store frequencies you find in chain search 
mode or chain search hold mode.

 Press FUNC and PGM in chain search mode or 

chain search hold mode. The lowest blank chan-
nel and bank appear.

 Press E to store the frequency into the blank 

channel. To select another channel, press FUNC 
+ 

 or 

 before you press E. You can also 

press 0-9 to select the bank.

If you try to save a frequency that is already stored, 
the scanner sounds an error tone and displays the 
channel that was duplicated. If you entered the fre-
quency by mistake, press ./CLR. To enter the fre-
quency anyway, press E to accept.

The scanner sets itself to program mode after you 
store a frequency.

You can use this mode to define the search range 
used during a chain search in each search bank. To 
set the scanner to program band select mode, press 
FUNC and B.SLCT. SEARCH appears. Then select a 
search bank.