Motorola RMV2080 ユーザーズマニュアル

English

Active Channels is the fourth Programming 
Mode. It allows you to modify the number of 
active channels the radio is programmed to 
support.

To set Active Channels:

•

Enter Advanced Configuration Mode and select 
the desired channel.

•

Short press the PTT button four times to enter the 
Active Channels Programming Selection Mode. 
The audible voice in the radio announces “Active 
Channels” and the current value.

•

Short press the SB1 or SB2 button until you get 
the number of channels desired.

•

Long press the PTT button. LED Indicator shows 
a green heartbeat to indicate ‘Idle’ Programming 
Mode.

•

Long press the PTT button to exit Programming 
Mode or turn OFF the radio.

Weather Channels is the last Programming 
mode. It allows you to toggle a radio channel 
between 2 way radio mode and weather alert 
mode.

To set channels to Weather Alert Mode:

•

Enter Advanced Configuration Mode and select 
the desired channel.

•

Short press the PTT button five times to enter the 
Weather Channels Programming Mode.

•

An audible voice announces “Weather Channel 
and Frequency Used: and instructions on how to 
change the values.

•

Short press the SB1 or SB2 button to enable/
disable the feature. 

•

Long press the PTT button. LED Indicator shows 
a green heartbeat to indicate ‘Idle’ Programming 
Mode.

•

Long press the PTT button again to exit 
Programming mode or turn OFF the radio.