Motorola RMV2080 ユーザーズマニュアル

English

To program, connect the RM Series radio via 
the Drop-in Charger Tray and CPS 
Programming Cable as shown in Figure 1 on 
page 41. Toggle the cable switch of the CPS 
Programming Cable to ‘CPS Mode’.

CPS allows you to program frequencies, PL/
DPL Codes as well as other features such as: 
Bandwidth Select, Time-out Timer, Power 
Select, Scan List, Call Tones, Scramble, 
Reverse Burst, etc. CPS is a very useful tool as 
it can also lock the Front-Panel Radio 
Programming or restrict any specific radio 
feature to be changed (to avoid accidentally 
erasing the preset radio values). It also 
provides security by giving the option to set up 
a password for profile radio’s management. For 
more information, refer to Features Summary 
Chart Section at the end of the User Guide.

(*) CPS Programming Cable P/N# 
HKKN4027_ is an accessory sold 
separately. Please contact your Motorola 
point of purchase for more information.

This timer sets the amount of time that the 
radio can continuously transmit before the 
transmission is automatically terminated. The 
default setting is 60 seconds and can be 
changed using the CPS. 

Power Select allows you to select between 
high and low transmission power per frequency 
in each channel. The power levels for RM 
Series 2W toggle between 1W and 2W. 

Call Tones feature allows you to transmit an 
audible tone to other radios on the same 
channel to alert them that you are about to talk 
or to alert them without speaking.

To use this feature, the Call Tones must be 
programmed to either SB1 or SB2 and 1 of the 
3 pre-recorded tones is selected.