VTech LS6325-5 ユーザーズマニュアル

You have four ways to begin a PTT call:

If you have a two-handset system, press and hold 

PUSh TO TALK 

when the handset is not in use.
Press 

PUSh TO TALK when the handset is not in use. Then use the  

dialing keys to enter the destination handset number.
Press 

PUSh TO TALK when the handset is not in use. Press  /

 or  

 to highlight the destination handset number and then press  

/SeLeCT or PUSh TO TALK.

a) Press 

 when the handset is not in use. 

b) Press 

 or 

 to highlight >

Push to talk, then press  

    

/SeLeCT. 

c) Select the destination handset number by pressing 

 or    

    

  or by using the dialing keys.

d) Press 

/SeLeCT or PUSh TO TALK.

Your handset screen shows 

Connecting to hANDSeT X... for a few 

seconds. When the connection is made, both your and the destination 

handset screens display 

Press and hold [PTT] to talk and beep once. 

Press and hold 

PUSh TO TALK on your handset. A chirp indicates your 

microphone is on. Speak toward the handset. Your voice is broadcast to 

the destination handset.

     While you are speaking, your handset screen shows 

PTT To hANDSeT X  

     (

X represents the destination handset number).

Release 

PUSh TO TALK after speaking. Both handsets beep once again. 

After the handsets beep, you can press and hold 

PUSh TO TALK to 

continue speaking or the destination handset can respond (see 

PTT on page 30).
To end the PTT call, press 

 or place the handset in the 

telephone base or charger. The handset screen shows 

ended for a few seconds. 

1.

•

•

•

•

2.

3.

4.

28

After 

PUSh TO TALK is released, the PTT call remains open for a short  

time. If no one presses 

PUSh TO TALK within 10 seconds, the PTT call  

ends automatically.