Motorola T7200 ユーザーズマニュアル

To disable Repeater Channels:
•

Turn your Radio Off.

•

Turn your radio back On while you press and hold the 

M

 and 

B

 for 3 seconds.

A single power-up chirp will sound (if Button Beeps are enabled) indicating that your 
radio now has returned to normal Channel mode. 
Channels 15 x - 22 x will no longer appear on your display.

Setting Repeater Channels
Once you enable your Repeater Channels on your T7200:
•

Press 

]

 to scroll up to Channel 15 x - 22 x, located just after Channel 22. 

•

When you scroll to a repeater Channel, the selected Interference Eliminator 
Code will be displayed briefly. Then, x will appear in these digits to indicate 
repeater operation. l will also display when you are on a Repeater 
Channel.

Setting Repeater Interference Eliminator Codes
The Interference Eliminator Codes for GMRS Repeater Channels 15 x - 22 x and 
GMRS Direct Channels 15-22 are linked. This means that when you change the 
Code on a GMRS Repeater Channel, the Code on the equivalent GMRS Direct 
Channel will change as well and vice versa (i.e. If you are on Channel 15, Code 30 
and you change to Code 31, then the Code will automatically change from 30 to 31 
on Channel 15 x). To change your Repeater Interference Eliminator Code:
•

Press the 

]

 to scroll up to any Channel between 15 x - 22 x. 

6864110R94.book  Page 35  Friday, February 8, 2002  2:34 PM