Motorola XPR 6350 ユーザーズマニュアル

Press the PTT button during hang time. The LED lights up 
solid green.

Wait for the Talk Permit Tone to finish (if enabled) and 
speak clearly into the microphone.
OR

 Wait for the PTT Sidetone to finish (if enabled) and 

speak clearly into the microphone.

Release the PTT button to listen.

If you do not respond within the hang time, the radio returns 
to scanning other channels/groups.

If a channel continually generates unwanted calls or noise 
(termed a “nuisance” channel), you can temporarily remove the 
unwanted channel from the scan list.

This capability does not apply to the channel designated as the 
Selected Channel.

When your radio “locks on to” an unwanted or nuisance 
channel, press the programmed Nuisance Channel Delete 
button until you hear a tone.

Release the Nuisance Channel Delete button. The 
nuisance channel is deleted.

Procedure: 
To restore the deleted nuisance channel, do one of the 
following:

Turn the radio off and power it on again, OR

Stop and restart a scan via the programmed Scan button, OR

Change the channel via the Channel Selector Knob.

You can turn on or off the ringing tones for a received Private 
Call (see Turning Radio Tones/Alerts On or Off on page 36). 

Your radio can be programmed by your dealer to continually 
alert you when a radio call remains unanswered. This is done 
by automatically increasing the alarm tone volume over time. 

This feature is known as Escalert.