Motorola XPR 6350 ユーザーズマニュアル
Advanced Features
English
30
•
You press the programmed Emergency On button during an
Emergency initiation/transmission state. This causes the
Emergency initiation/transmission state. This causes the
radio to exit this state, and to reinitiate Emergency.
Exiting an Emergency Mode
NOTE: This feature is only applicable to the radio sending the
Emergency Alarm.
Your radio exits Emergency mode when one of the following
occurs:
occurs:
•
Emergency Alarm acknowledgement is received (for
Emergency Alarm only), OR
Emergency Alarm only), OR
•
All retries to send the alarm have been exhausted, OR
•
The Emergency Off button is pressed.
NOTE: If your radio is powered off, it exits the Emergency
mode. The radio will not reinitiate the Emergency
mode automatically when it is turned on again.
mode automatically when it is turned on again.
Text Messaging Features
Sending a Quick Text Message
You can send Quick Text messages, programmed by your
dealer, via the programmable button.
dealer, via the programmable button.
Procedure:
1
Press the programmed One Touch Access button to send
a predefined Quick Text message to a predefined ID.
a predefined Quick Text message to a predefined ID.
2
The LED lights up solid green.
3
Two chirps indicate that the message is sent successfully.
OR
A low-pitch tone indicates that the message cannot be sent.
OR
A low-pitch tone indicates that the message cannot be sent.