Motorola XPR 6350 ユーザーズマニュアル

If enabled, this feature allows you to access your radio via 
password upon powering up. Use the Channel Selector Knob 
and the three Side Buttons to enter password (see Radio 
Controls of page 6):

Channel Selector Knob positions 1 to 9 represent 
numbers 1 to 9, and position 10 represents number 0.

Side Buttons 1 to 3 represent numbers 1 to 3.

Procedure:
Power up the radio.

You hear a continuous tone.

Use the Channel Selector Knob to enter the first digit of the 
password.

Press Side Button 1, 2 or 3 to enter each digit of the 
remaining three digits of the password. You hear a positive 
indicator tone for each Side Button press.
When the second digit of the password is entered, your 
radio ignores any Channel Selector Knob position change.

When the last digit of the four-digit password is entered, 
your radio automatically checks the validity of the password.
If the password is correct:
Your radio proceeds to power up. See Powering Up the 

Radio on page 5.
OR
If the password is incorrect:
You hear a continuous tone. Repeat Steps 1 to 3.
OR
After the third incorrect password, your radio enters into 
locked state. A tone sounds and the LED double blinks 
yellow.

NOTE: The radio is unable to receive any call, including 

emergency calls, in locked state.

Procedure:
Wait for 15 minutes. Repeat Steps 1 to 4 in Accessing the 
Radio from Password on page 34.
OR
Power up the radio, if you have powered down the radio during 
locked state:

A tone sounds and the LED double blinks yellow.

Wait for 15 minutes. Repeat Steps 1 to 4 in Accessing the 
Radio from Password on page 34.