Motorola XPR 7350 ユーザーズマニュアル
Advanced Features
English
28
acknowledgement, and after all retries have been
exhausted, a low-pitched tone sounds.
exhausted, a low-pitched tone sounds.
4
Radio exits the Emergency Alarm mode.
If your radio is set to Silent, it does not display any audio or
visual indicators during Emergency mode.
visual indicators during Emergency mode.
Sending an Emergency Alarm with Call
This feature allows you to send an Emergency Alarm to a group
of radios. Upon acknowledgement by a radio within the group,
the group of radios can communicate over a programmed
Emergency channel.
of radios. Upon acknowledgement by a radio within the group,
the group of radios can communicate over a programmed
Emergency channel.
Procedure:
1
Press the programmed Emergency On button.
2
The LED lights up solid green.
3
When an Emergency Alarm acknowledgment is received,
the Emergency tone sounds. The LED blinks green.
the Emergency tone sounds. The LED blinks green.
4
Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
your mouth.
5
Press the PTT button to make the call. The LED lights up
solid green.
solid green.
6
Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
OR
clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled) and
speak clearly into the microphone.
7
Release the PTT button to listen.
8
When the channel is free for you to respond, a short alert
tone sounds (
if the Channel Free Indication feature is
enabled). Press the PTT button to respond.
OR
Once your call ends, press Emergency Off button to exit
the Emergency mode.
OR
Once your call ends, press Emergency Off button to exit
the Emergency mode.
If your radio is set to Silent, it does not display any audio or
visual indicators during Emergency mode, or allow any received
calls to sound through the radio’s speaker, until you press the
PTT button to initiate the call.
visual indicators during Emergency mode, or allow any received
calls to sound through the radio’s speaker, until you press the
PTT button to initiate the call.
If your radio is set to Silent with Voice, it does not display any
audio or visual indicators during Emergency mode, but allow
incoming calls to sound through the radio’s speaker. The
indicators only appear once you press the PTT button to initiate,
or respond to, the call.
audio or visual indicators during Emergency mode, but allow
incoming calls to sound through the radio’s speaker. The
indicators only appear once you press the PTT button to initiate,
or respond to, the call.
Sending an Emergency Alarm with Voice to
Follow
This feature allows you to send an Emergency Alarm to a group
of radios. Your radio’s microphone is automatically activated,
of radios. Your radio’s microphone is automatically activated,