Motorola CLP series ユーザーズマニュアル
![Motorola](https://files.manualsbrain.com/attachments/83de88ba2280e7232128e8931d7cbd2a38dcc654/common/fit/150/50/0293f422c4d32e7e0f777d5e11bc33c83ea5627f71ddf155374c02a23d9a/brand_logo.png)
CLP REPEATE
R CAP
ABILITY:
W
O
RK
ING WITH RPX
ING WITH RPX
25
CLP REPEATER
CAPABILITY: WORKING
WITH RPX
CLP REPEATER CAPABILITY
Use the Single Unit Charger or use the pocket with
“PROG” label on the Multi-Unit Charger to clone
the RPX.
“PROG” label on the Multi-Unit Charger to clone
the RPX.
Note:
Connect the RDX Serial Clone Cable (P/N
RLN6303) and the Mini-USB to the Micro-USB
Adapter Cable (P/N SKN6252) in order to link the
CLP and RPX units.
RLN6303) and the Mini-USB to the Micro-USB
Adapter Cable (P/N SKN6252) in order to link the
CLP and RPX units.
INSTRUCTIONS
1.
To put the CLP radio into clone mode, press
and hold PTT and the “-” button while turning
the radio ON until you hear the Cloning Tone
and Blinking Orange
and hold PTT and the “-” button while turning
the radio ON until you hear the Cloning Tone
and Blinking Orange
on the Smart Status
Glow.
Programming the RPX through a
Single Unit Charger
Single Unit Charger
1.
Place the CLP radio into the charging
pocket.
pocket.
2.
Connect the micro-USB plug of the micro-
USB adapter cable with the RDX Serial
Clone Cable into the micro-USB receptable
charging pockets.
USB adapter cable with the RDX Serial
Clone Cable into the micro-USB receptable
charging pockets.
3.
Connect the Mini-USB plug of the RDX
Serial Clone Cable into the RPX Mini-USB
receptable.
Serial Clone Cable into the RPX Mini-USB
receptable.
Programming the RPX through a Single Unit
Charger