Motorola EX600XLS ユーザーズマニュアル

ページ / 72
42
English
SCAN
To start Auto Group Scan:
Select a talkgroup that has been programmed 
for Auto Group Scan by your dealer.
Note:
You do not need to press a 
preprogrammed Scan button.
The 
G
 symbol appears on the LCD 
screen when non-prioritized or prioritized 
Auto Group Scan has been activated.
There is no LED indicator during Auto 
Group Scan.
To Stop Auto Group Scan: 
Select a talkgroup that has not been programmed 
for Auto Group Scan by your dealer.
ALL GROUP SCAN 
G
(LTR TRUNKED OPERATION ONLY)
All Group Scan scans all talkgroups within the 
selected LTR trunked zone. 
When All Group Scan is Enabled:
The 
G
 symbol appears on the LCD 
screen.
The LED indicator blinks green during All 
Group Scan operation; it stops blinking when 
the radio switches to an active talkgroup.
Note:
If you enter menu mode while the radio is 
scanning, scanning stops. It resumes when 
you exit menu mode.
To Start or Stop All Group Scan Operation 
through a preprogrammed button (see page 21):
Press the preprogrammed All Group Scan 
button once to start All Group Scan.
Press the preprogrammed All Group Scan 
button again to stop All Group Scan.
–or–
To Start or Stop All Group Scan Operation 
through the menu:
1
)
 to enter menu mode.
2
+
 or 
?
 until
3
)
 to select
You see the current scan status.
4
+
 or 
?
 until 
–or– 
5
)
 to confirm your selection.
All Group Scan
All Group Scan
All Group On?
All Group Off?
07_Scan.fm  Page 42  Thursday, September 5, 2002  5:02 PM