Motorola EX600XLS ユーザーズマニュアル
42
English
SCAN
To start Auto Group Scan:
Select a talkgroup that has been programmed
for Auto Group Scan by your dealer.
for Auto Group Scan by your dealer.
Note:
You do not need to press a
preprogrammed Scan button.
preprogrammed Scan button.
•
The
G
symbol appears on the LCD
screen when non-prioritized or prioritized
Auto Group Scan has been activated.
Auto Group Scan has been activated.
•
There is no LED indicator during Auto
Group Scan.
Group Scan.
To Stop Auto Group Scan:
Select a talkgroup that has not been programmed
for Auto Group Scan by your dealer.
for Auto Group Scan by your dealer.
ALL GROUP SCAN
G
(LTR TRUNKED OPERATION ONLY)
All Group Scan scans all talkgroups within the
selected LTR trunked zone.
selected LTR trunked zone.
When All Group Scan is Enabled:
•
The
G
symbol appears on the LCD
screen.
•
The LED indicator blinks green during All
Group Scan operation; it stops blinking when
the radio switches to an active talkgroup.
Group Scan operation; it stops blinking when
the radio switches to an active talkgroup.
Note:
If you enter menu mode while the radio is
scanning, scanning stops. It resumes when
you exit menu mode.
scanning, scanning stops. It resumes when
you exit menu mode.
To Start or Stop All Group Scan Operation
through a preprogrammed button (see page 21):
through a preprogrammed button (see page 21):
•
Press the preprogrammed All Group Scan
button once to start All Group Scan.
button once to start All Group Scan.
•
Press the preprogrammed All Group Scan
button again to stop All Group Scan.
button again to stop All Group Scan.
–or–
To Start or Stop All Group Scan Operation
through the menu:
through the menu:
1
)
to enter menu mode.
2
+
or
?
until
3
)
to select
You see the current scan status.
4
+
or
?
until
–or–
5
)
to confirm your selection.
All Group Scan
All Group Scan
All Group On?
All Group Off?
07_Scan.fm Page 42 Thursday, September 5, 2002 5:02 PM